Testing of all installed “Basic Links” shall be performed using a TIA Category 6 and ISO Class E Standard hand held tester and performed to the latest revision of TIA/EIA-568-B documents. All reports shall be recorded and presented to the end user before acceptance.  This includes all installed fiber runs.  Fiber will be tested for both wavelengths of multimode and single mode fiber by power meter and light source.

Testing

Testing of cabling shall be performed prior to system cut-over. 100 percent of the UTP horizontal and riser pairs shall be tested for opens, shorts, polarity reversals, transposition and presence of AC voltage.  UTP voice, data and building control device horizontal wiring pairs shall be tested to the latest revision of the TIA/EIA-568-B documents from the information outlet to the TC and from the TC to the information outlet.  In addition, all assigned circuits shall be tested from the information outlet/building control device to the MDF.

Workmanship

Components of the premise distribution system shall be installed in a neat, orderly manner consistent with the best telephone and data installation practices.  Wiring color codes shall be strictly observed and termination shall be uniform throughout.  Identification marking and systems shall be uniform, permanent and readable and in accordance with TIA/EIA-606 standards.

Warranty

Product Warranty and System Assurance Warranty for this Structured Cabling System  shall be provided.  Upon successful completion of the installation and subsequent testing by the installer and Customer, Customer shall be provided with a Warranty certificate registering the installation by manufacturer or a Customer approved Contractor Warranty.